Guild of Oregon Woodworkers upcoming events

EDG - Scroll Saw Basics 26-3 (13 Aug 2026)

Fri, 14 Aug 2026 00:00:00 GMT

Scroll Saw Basics

Instructors: Rick Martin

Class Assistants: TBD

Students: 4 maximum

Prerequisite: Intro to Guild Safety

Skill Level: all

This class will provide an introduction to the use of the scroll saw.

In this class, the student will learn the basic mechanics of the scroll saw and practice the use of it by making a completed jigsaw puzzle.

Check out the Guild Scholarship Program to see if you qualify for the various scholarships we offer.

The Guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending Guild events, workshops, or gatherings when experiencing symptoms of a contagious illness, especially those associated with flu, RVS or COVID-19.

Class Cancellation Policy

EDS - CORE TOOL CERTIFICATION - EVENING 26-37 (13 Aug 2026)

Fri, 14 Aug 2026 00:00:00 GMT

Instructor - Mark Klein

Assistant - David Neff

Prerequisites: Completion of Intro to the Guild (all members) and Getting Started (beginners only)

This class is designed for the member to become certified on the "Core tools" and is required to work in the Guild machine room or to take classes using the “core” power tools.

The class consists of three 4-hour sessions and will certify you on the commonly used "core” power tools: chop saw, bandsaw, jointer, planer, table saw, stationary sanders and the drill press. The first two sessions will be instruction and the third session will be a time for you to begin a simple project using the skills you have learned in a closely monitored environment.

The instructor will demonstrate using each tool and discuss safe practices. There will be the opportunity to practice using each tool. By the end of the class, one should feel comfortable operating each tool safely. Upon successful completion, the instructor will certify the member on the 7 core tools.

Materials will be provided.

Do not register for this 3 session class unless you are able to attend all sessions. We cannot reschedule you if you are not able to attend all sessions and no refunds will be given for missed sessions.

Students should bring these items: Personal and required PPE, pencil, and tape measure. Bring a copy of this document, either digitally or printed, Core Tool Handout . Bring a combination square, if you have one. Don't go out and buy a cheap one for the class. We have plenty to borrow and we'll discuss the benefits of investing wisely in a quality square.

Please contact Kimberly Grommes with questions.

Check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending Guild events, workshops, or gatherings when experiencing symptoms of a contagious illness, especially those associated with Flu, RSV or COVID-19.

Class Cancellation Policy

EDG - Half-Blind Dovetails for Beginners 26-3 (14 Aug 2026)

Fri, 14 Aug 2026 16:00:00 GMT

Instructor: Robert Mack

Assistants: John Augsberger, Allie Menard, Greg Reeves

Skill Level: All

Prerequisites:

Required: Introduction to Guild Safety
Recommended: prior completion of Hand Cut Dovetails for Beginners class

This is a follow up to the class “Hand Cut Dovetails for Beginners”. Half blind dovetails are typically used when joining drawer sides to a drawer front. This class will emphasize:

a) how to mark out half-blind dovetails on your stock,

b) proper sawing technique and

c) proper chiseling technique.

This class is not designed to make students experts in cutting half-blind dovetails, however we hope to teach students the basic tools and skills needed to cut blind dovetails, allowing them to improve their skills in the future.

Please include your name as visible when registering so the instructor can email any handouts prior to class.

Check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

The Guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending guild events, workshops, or gatherings when experiencing symptoms of a contagious illness, especially those associated with RSV, flu or COVID-19.

Class Cancellation Policy

EDG - Dovetail Box - Make a Small Hand-cut Dovetail Box 26-1 Follow up session (15 Aug 2026)

Sat, 15 Aug 2026 16:00:00 GMT

Follow-up session

Make a Small Hand Cut Dovetails Box

Instructor: Robert Mack

Assistants: John Augsburger

Prerequisites: Required: Introduction to Guild Safety

Required: Core Tool Certification

Recommended: Router certification

Recommended: Experience cutting dovetails

Skill Level - Intermediate

Followup session for those students who need more time complete their boxes.

Check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

The Guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending guild events, workshops, or gatherings when experiencing symptoms of a contagious illness, especially those associated with RSV, flu or COVID-19.

Class Cancellation Policy

EDS - INTRO TO GUILD SAFETY 2026-16 (16 Aug 2026)

Sun, 16 Aug 2026 16:00:00 GMT

Introduction to Guild Safety

Instructor: Education and Membership Team

Welcome to the Introduction to Guild Safety class. For every Guild member wishing to take Education classes, use the Guild shop for personal projects, or participate in the Community Project sessions, this is a required class, regardless of experience or skill level.

This class is presented by the Education and Membership Team. In addition to important information about shop safety, we will provide an overview of Guild Education, Community Projects and Open Shop programs. You will also learn about how to volunteer because the Guild only succeeds with active volunteers!

Included in the class is a tour of the Guild Shop, introducing the stationary tools and their function.

This class is about 3 hours.

Please include your name in the list of attendees so the Instructor can track attendance and make your Guild shop name badge. It is only visible on the class registration list to other Guild members.

Complete the following before class:

Print out and complete the self-evaluation section (left side) of the New Member Experience Assessment/Shop Certification form. Bring the entire form to class.
Be sure you have read and then checked the box on your member profile acknowledging that you have read and agreed to the Liability Release form.
Read the attached resources and take the Guild Safety Test. Bring your answers to class on paper or a device.

General Safety

Guild Safety Manual

Policy on the Use of Personal Protective Equipment

Material Guidelines

Upon completion of the Intro to the Guild Safety class, you will be directed to:

1. A second beginning class, Getting Started; required for those with little or no experience with portable power tools.

2. Bypass the Getting Started class and start the path to the Shop Certification classes.

For more information on the Shop Certification process: https://guildoforegonwoodworkers.org/Safety-Classes-&-Shop-Certification

Check out the Guild Scholarship Program to see if you qualify for the various scholarships we offer.

The Guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending Guild events when experiencing symptoms of a contagious illness, especially those associated with RSV, flu or COVID-19.

Class Cancellation Policy

EDG - Open Studio - Hand Tool Mentoring 26-11 (16 Aug 2026)

Sun, 16 Aug 2026 20:00:00 GMT

Hand Tool Mentoring

Mentor: Tim Moore and others

Requirements: Intro to Guild Safety

Shop time

Here is your chance to come in to the Studio and work on a personal project. Whether it is a leatherworking project, sharpening your chisels, fettling a plane or building a ukulele, you are welcome to sign up for the hand tool mentoring session from 1 to 5:00 and talk to one of our experienced shop attendants. We generally don't have a big crowd, so this is your chance to get something done!

The time will be charged like machine use in open shop - $15 per hour with a 1 hour minimum. After 1 hour, the time is charged in 30 minute increments. Please purchase shop time before coming.

This is an open agenda session. That means participants come with questions or hand tool tasks that you would like some help on and the instructor will be there as a resource. Perhaps it is to sharpen a chisel? Maybe there is a hand tool that you would like some advice on. This is an ‘open-door’ session so you can show up at any time during the session.

Tim suggests that you contact him with questions and anticipated arrival time so that he can plan the afternoon. tim.moore@guildoforegonwoodworkers.org

The Guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending guild events, workshops, or gatherings when experiencing symptoms of a contagious illness, especially those associated with RSV, Flu or COVID-19.

EDS - CORE TOOL CERTIFICATION - EVENING 26-38 (17 Aug 2026)

Tue, 18 Aug 2026 00:00:00 GMT

Instructor - Jim Meyer

Assistant - Micah Stolowitz, Kimberly Grommes

Prerequisites: Completion of Intro to the Guild (all members) and Getting Started (beginners only)

This class is designed for the member to become certified on the "Core tools" and is required to work in the Guild machine room or to take classes using the “core” power tools.

Materials will be provided.

Please contact Kimberly Grommes with questions.

Check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

Class Cancellation Policy

EDG - Basics of Fine Woodworking 26-3 (17 Aug 2026)

Tue, 18 Aug 2026 00:30:00 GMT

Basics of Fine Woodworking

Prerequisites: Intro to Guild Safety & Core Tool Certification

Instructors: Multiple

Assistants: Allie Menard & Ginny Benware

Students: 6 maximum

This course is designed for beginning woodworkers who have completed Core Tool Certification and:

1. Would like to build confidence using these tools.

2. Desire introductory knowledge on the process of bringing a project from concept through the process of woodworking, to applying a finish.

This class consists of 7 sessions offered on Monday evenings. Students are expected to attend all 7 sessions. There will not be any makeup sessions offered for missed classes. Each session covers specific aspects of woodworking, presented in the typical project order of operations.

Instructors will provide information and hands-on practice on the process of woodworking, through the construction of a simple box that you will work on through each session to completion. The objective is the acquisition of knowledge and skills of the process, rather than the box, though you will have a constructed box in the end to remind you of the process and your abilities.

The session topics are as follows:

Session One: Design and Layout

- Hands-on: drawings, layout, modeling, construction – table saw (cross cutting) and bandsaw (resawing)

Session Two: Understanding Wood

- Hands-on: milling – jointer, tablesaw (ripping), planer

Session Three – Joinery

- Hands-on: tablesaw (crosscutting and cutting grooves), bandsaw, layout

Session Four – Hand Tools

- Hands-on: layout, handsaw, coping/fret saw, chisels, block plane

Session Five – Work Session

- Hands-on: complete box to to point of assembly

Session Six– Assembly and Glue-up

- Hands-on: table saw (cutting a rabbet), surface prep (sanding), hand plane and shooting board, clamps, glue

Session Seven – Finishing

- Hands-on: applying finish on sample boards, shellac finish on box

Materials will be provided.

PPE required: hearing protection, safety glasses, dust mask (as needed), closed-toed shoes.

Students should also bring: a fine point mechanical pencil and a tape measure. If you have your own combination square and marking knife, bring them, however, there are plenty of these in the Studio to use if you do not own one. Also bring your block plane if you have one. Do not buy one for this course.

Please contact Pat Shuff (pat.shuff@guildoforegonwoodworkers.org) with questions.

Guild classes are Member-only classes. Not a member? Visit the Membership webpage and Join Now.

Check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

The guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending guild events, workshops, or gatherings when experiencing symptoms of a contagious illness, especially those associated with RSV, flu or COVID-19.

Class Cancellation Policy

EDS - PANTOROUTER CERTIFICATION CLASS 26-08 (18 Aug 2026)

Tue, 18 Aug 2026 20:00:00 GMT

PantoRouter Certification Class

Instructor: Ken Fairfax
Class Assistant: TBD

Prerequisites: Core Tool Certification and Router Certification

Cost: $90

The PantoRouter™ is an innovative tools that utlizes a router to create highly precise joinery, including mortise and tenon joints, dovetail joints, box joints, and other specialized joint types.

In this class, students will cover both safety as well as the basics of using the PantoRouter™ to create accurate, reproducible mortise and tenon joints. During the class the 4 students will jointly create a table base using mortise and tenon joinery while learning how to set up, calibrate, and safely operate the PantoRouter™. While completing this class, each student will practice setting up the machine for a cut, aligning work pieces, and safely cutting multiple joints.

After successfully completing the class, students will be certified to use the PantoRouter™ during Open Shop periods. While the class uses mortise and tenon joints for teaching purposes, PantoRouter™ users can consult the manual as well as the extensive online library at PantoRouter.com to learn how to apply their skills to other joints, including dovetail and box joints.

Students should bring personal protective equipment, including safety goggles and hearing protection.

Guild classes are Member-only classes. Not a member? Visit the Membership webpage and Join Now.

Check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

The guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending guild events, workshops, or gatherings when experiencing symptoms of a contagious illness, especially those associated with COVID-19.
Follow CDC guidelines: If you have tested positive for COVID-19 or have been exposed to someone who has tested positive for COVID-19, you are expected to follow the current CDC guidelines.

Class Cancellation Policy

EDS - CORE TOOL CERTIFICATION - AFTERNOON 26-36 (18 Aug 2026)

Tue, 18 Aug 2026 20:00:00 GMT

Instructor - Dennis Dolph

Assistant - Ed Ferguson, Tim Moore

Prerequisites: Completion of Intro to the Guild (all members) and Getting Started (beginners only)

This class is designed for the member to become certified on the "Core tools" and is required to work in the Guild machine room or to take classes using the “core” power tools.

Materials will be provided.

Please contact Kimberly Grommes with questions.

Check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

Class Cancellation Policy

EDG - Intro to Wood Talk and Milling 26-3 (19 Aug 2026)

Thu, 20 Aug 2026 00:00:00 GMT

Intro to Wood Talk and Milling

Instructor: Mark Allen

Class Assistant: Greg Reeves

Students: 4 spaces

Prerequisite: Core Tool Certification

The first step in any project is buying wood and milling it to yield flat, dimensional boards of the proper thickness and with all angles at 90 degrees. This class is designed to teach the proper methods and sequence for this milling process when using machines (vs. hand tools). Our focus will be on the preliminary milling that must be done for the wood to be ready for final project milling. Since it is where EVERY project must begin, it is an essential skill for EVERY woodworker.

In the class you will learn basic terminology that is used to describe wood; receive information on wood grain and movement; participate in the demonstrated milling of lumber with each machine; and work with a team of fellow students to complete a small milling project. You will leave the class knowledgeable and comfortable with the use of equipment for milling.

Students should bring these items: pencil, combination square, and tape measure.

You must have the following Personal Protection Equipment (PPE):

ANSI Z87.1 rated safety glasses if using the machine room.
N95 or better dust mask. These are generally optional but may be required by the Shop Attendant if they determine the air quality will require it.
Hearing protection

The Guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending guild events, workshops, or gatherings when experiencing symptoms of a contagious illness, especially those associated with COVID-19, flu or RSV.

Class Cancellation Policy

EDG - BEGINNING ROUTER INLAY 26-2 (20 Aug 2026)

Thu, 20 Aug 2026 20:00:00 GMT

Instructor: Carol Boyd

Class Assistant: Kim Montagriff

Students: 4

Prerequisites: All 3 certifications must be completed prior to class

Intro to Guild Safety
Core Tools
Router Certification

Learn how to do a simple inlay. You will have a choice of creating an inlay in a wood blank suitable for use as a tray or in a box, using a template and a router. There will be a variety of patterns to choose from.

If you prefer, you can bring your own piece for the inlay – it must be able to hold a 2” inlay. Please contact the instructor ahead of time if you want to do this.

Students: Please bring your PPE, small square, and pencil.

Guild: All materials will be provided.

Tools Used: Hand held Router

Check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

The Guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending Guild events, workshops, or gatherings when experiencing symptoms of a contagious illness, especially those associated with flu, RSV or COVID-19.

Class Cancellation Policy - cancel 7 days in advance for full refund (exceptions for illness or emergency)

EDS - CORE TOOL CERTIFICATION - EVENING 26-37 (20 Aug 2026)

Fri, 21 Aug 2026 00:00:00 GMT

Instructor - Mark Klein

Assistant - David Neff

Prerequisites: Completion of Intro to the Guild (all members) and Getting Started (beginners only)

This class is designed for the member to become certified on the "Core tools" and is required to work in the Guild machine room or to take classes using the “core” power tools.

Materials will be provided.

Please contact Kimberly Grommes with questions.

Check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

Class Cancellation Policy

EDS - CORE TOOL CERTIFICATION - EVENING 26-39 (21 Aug 2026)

Sat, 22 Aug 2026 00:00:00 GMT

Instructor - Mike Sandmann

Assistant - Ezra Richards, Matt Grommes

Prerequisites: Completion of Intro to the Guild (all members) and Getting Started (beginners only)

This class is designed for the member to become certified on the "Core tools" and is required to work in the Guild machine room or to take classes using the “core” power tools.

Materials will be provided.

Please contact Kimberly Grommes with questions.

Check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

Class Cancellation Policy

EDS - CORE TOOL CERTIFICATION - AFTERNOON 26-40 (22 Aug 2026)

Sat, 22 Aug 2026 20:00:00 GMT

Instructor - Stuart Brown

Assistant - Tom Nelson

Prerequisites: Completion of Intro to the Guild (all members) and Getting Started (beginners only)

This class is designed for the member to become certified on the "Core tools" and is required to work in the Guild machine room or to take classes using the “core” power tools.

Materials will be provided.

Please contact Kimberly Grommes with questions.

Check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

Class Cancellation Policy

EDS Getting Started-Hands On With Portable Power Tools 26-23a (23 Aug 2026)

Sun, 23 Aug 2026 16:00:00 GMT

Getting Started – Shop Safety for Beginners

Instructors: TBD

Class Assistant: TBD

Prerequisite: Introduction to Guild Safety

The Getting Started class is a continuation of the safety process in good woodworking practices taught in the Intro to the Guild class.

Getting Started is a required class for those needing experience with the safe and appropriate use of portable power tools, prior to starting the path to the Guild’s Shop Certification classes.

This is a four-hour class, with ~2½ hours of practice with a jig saw, a trim router, a random orbital sander, drill motors (battery), and installing their accessories.

Curriculum includes:

Drawing up a plan and cutting list
Wood characteristics, hidden hazards
Simple approaches to accuracy,
Specific tool safety techniques.

The final section of the class will be using these tools to create a cutting board. Material provided by the Guild.

Please review the Guild’s PPE (personal protection equipment) policy from the Intro to the Guild class.

Have all your PPE for this class. Approved wrap around safety glasses, hearing protection, a dust mask (these tools are not connected to the dust collection system).

Class size is 6 students. Each student will have their own area in the Shop with each tool to be demonstrated.

Dress appropriately for working in the Shop. (no watch bands, hair tied back, no dangling sleeves or strings, bracelets etc)

Handouts will be reviewed in class.

These items will be used during class pencil, combination square or similar, razor knife, tape measure, notebook, piece of chalk, blank piece of paper for drawing and a straight edge. You do not need to have these (other than paper)

Please bring your own PPE and pencil.

Upon completion of Getting Started, members can sign-up for the Core Tool Certification classes.

For more information on the Shop Certification process:https://guildoforegonwoodworkers.org/Safety-Classes-&-Shop-Certification

The Guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending Guild events when experiencing symptoms of a contagious illness, especially those associated with flu, RSV or COVID-19.

Class Cancellation Policy

EDG - Sharpening Chisels and Plane Irons 26-6 (23 Aug 2026)

Sun, 23 Aug 2026 20:00:00 GMT

Instructor: Tim Moore

Class Assistant: Kevin Smith

Students: 4

Prerequisite: Intro to Guild Safety

This four-hour class is designed to bring your chisels and hand planes up to an acceptable level of sharpening, good enough to get back to woodworking quickly. We will focus on how we sharpen the Guild's own tools, primarily using our Veritas sharpening jig since it is relatively simple and the results are repeatable. We will also briefly cover other approaches, such as sandpaper (Scary Sharp®) and a basic jig, such as the Eclipse and its clones. You are encouraged to bring your own tools in to sharpen and if time permits, we can talk about other sharpening challenges, such as small or skewed blades, scrapers, etc.

Check out the Guild Scholarship Program to see if you qualify for the various scholarships we offer.

The Guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending Guild events, workshops, or gatherings when experiencing symptoms of a contagious illness, especially those associated with RSV, flu or COVID-19.

Class Cancellation Policy

EDG - MILLING FOR CUSTOM CABINETS 26-3 (24 Aug 2026)

Mon, 24 Aug 2026 16:00:00 GMT

CUSTOM CABINETS MILLING TEAM

Instructor - Bill Gemulla

Prerequisites:

Core Tool Certification

Ability to work independently and with confidence at the table saw, jointer and planer

Skill Level: Advanced Beginner/Intermediate/Advanced.

Desired: One or more Shop Attendants. Ability to handle full sheets of plywood with assistance.

Tools Used: Track saw, table saw, jointer, planer.

Description: This is an opportunity to help the Education Team prepare materials for the Building Custom Cabinets class. We will mill lumber and full-size sheets of plywood to final sized parts.

The Guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending Guild events, workshops, or gatherings when experiencing symptoms of a contagious illness, especially those associated with the flu, RSV or COVID-19..

Class Cancellation Policy

EDS - CORE TOOL CERTIFICATION - EVENING 26-38 (24 Aug 2026)

Tue, 25 Aug 2026 00:00:00 GMT

Instructor - Jim Meyer

Assistant - Micah Stolowitz, Kimberly Grommes

Prerequisites: Completion of Intro to the Guild (all members) and Getting Started (beginners only)

This class is designed for the member to become certified on the "Core tools" and is required to work in the Guild machine room or to take classes using the “core” power tools.

Materials will be provided.

Please contact Kimberly Grommes with questions.

Check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

Class Cancellation Policy

EDG - Basics of Fine Woodworking 26-3 (24 Aug 2026)

Tue, 25 Aug 2026 00:30:00 GMT

Basics of Fine Woodworking

Prerequisites: Intro to Guild Safety & Core Tool Certification

Instructors: Multiple

Assistants: Allie Menard & Ginny Benware

Students: 6 maximum

This course is designed for beginning woodworkers who have completed Core Tool Certification and:

1. Would like to build confidence using these tools.

2. Desire introductory knowledge on the process of bringing a project from concept through the process of woodworking, to applying a finish.

The session topics are as follows:

Session One: Design and Layout

- Hands-on: drawings, layout, modeling, construction – table saw (cross cutting) and bandsaw (resawing)

Session Two: Understanding Wood

- Hands-on: milling – jointer, tablesaw (ripping), planer

Session Three – Joinery

- Hands-on: tablesaw (crosscutting and cutting grooves), bandsaw, layout

Session Four – Hand Tools

- Hands-on: layout, handsaw, coping/fret saw, chisels, block plane

Session Five – Work Session

- Hands-on: complete box to to point of assembly

Session Six– Assembly and Glue-up

- Hands-on: table saw (cutting a rabbet), surface prep (sanding), hand plane and shooting board, clamps, glue

Session Seven – Finishing

- Hands-on: applying finish on sample boards, shellac finish on box

Materials will be provided.

PPE required: hearing protection, safety glasses, dust mask (as needed), closed-toed shoes.

Please contact Pat Shuff (pat.shuff@guildoforegonwoodworkers.org) with questions.

Guild classes are Member-only classes. Not a member? Visit the Membership webpage and Join Now.

Check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

The guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending guild events, workshops, or gatherings when experiencing symptoms of a contagious illness, especially those associated with RSV, flu or COVID-19.

Class Cancellation Policy

EDG - Make Your First Cutting Board 26-3 (25 Aug 2026)

Tue, 25 Aug 2026 20:00:00 GMT

Instructor: Pat Shuff

Class Assistant: Bob Mack

Students: 6 spaces

Prerequisites:

Required: Intro to Guild Safety

Required: Core Tool Certification

Recommended: Router Certification

This is an introductory hands-on class in which students will learn to make a laminated face-grain cutting board. During the two, 3-hour class sessions, students will mill the wood from raw boards, glue up the boards for drying between classes, watch demonstrations of the milling and shaping steps, and then work on their own boards. Students will get hands-on practice with the table saw, planer, router, band saw (optional), disc, belt and spindle sanders, and router table (optional) to shape their cutting board.

The goal is to have a rough cutting board drying overnight and a finished cutting board to take home at the end of class. In some cases, final sanding and application of mineral oil finish will be done at home. In exceptional cases where more shop time is needed for use of power tools, we will try to accommodate students with a shop session when they can use the shop to finish up their board.

Wood will be provided. Remember to bring your Personal Protective Equipment - eyes, ears, and lung protection.

Check out the Guild Scholarship Program to see if you qualify for the scholarships we offer.

Please register online and remit payment within 15 minutes. Your registration is not complete without payment.

The Guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending Guild events, workshops, or gatherings when experiencing symptoms of a contagious illness, especially those associated with flu, RSV and COVID-19.

Class Cancellation Policy

Lutherie SIG (25 Aug 2026)

Wed, 26 Aug 2026 00:30:00 GMT

LUTHERIE SIG

SIG Leads: Janet Starck & Tim Moore

Requirements: Intro to Guild Safety

This SIG is for anyone interested in Lutherie no matter your skill or knowledge level. Come and learn or share your knowledge and love of stringed instruments with other Guild members.

For additional information or to be added to the Lutherie email list contact Tim Moore.

All Guild Members are welcome at no charge. Please Register.

------------------------------------------------------------------------------------------------------------------------

Not a member? Visit the Membership webpage and Join Now.

EDG - MILLING FOR CUSTOM CABINETS 26-3 (26 Aug 2026)

Wed, 26 Aug 2026 16:00:00 GMT

CUSTOM CABINETS MILLING TEAM

Instructor - Bill Gemulla

Prerequisites:

Core Tool Certification

Ability to work independently and with confidence at the table saw, jointer and planer

Skill Level: Advanced Beginner/Intermediate/Advanced.

Desired: One or more Shop Attendants. Ability to handle full sheets of plywood with assistance.

Tools Used: Track saw, table saw, jointer, planer.

Description: This is an opportunity to help the Education Team prepare materials for the Building Custom Cabinets class. We will mill lumber and full-size sheets of plywood to final sized parts.

The Guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending Guild events, workshops, or gatherings when experiencing symptoms of a contagious illness, especially those associated with the flu, RSV or COVID-19..

Class Cancellation Policy

EDG - Make Your First Cutting Board 26-3 (26 Aug 2026)

Wed, 26 Aug 2026 20:00:00 GMT

Instructor: Pat Shuff

Class Assistant: Bob Mack

Students: 6 spaces

Prerequisites:

Required: Intro to Guild Safety

Required: Core Tool Certification

Recommended: Router Certification

Wood will be provided. Remember to bring your Personal Protective Equipment - eyes, ears, and lung protection.

Check out the Guild Scholarship Program to see if you qualify for the scholarships we offer.

Please register online and remit payment within 15 minutes. Your registration is not complete without payment.

The Guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending Guild events, workshops, or gatherings when experiencing symptoms of a contagious illness, especially those associated with flu, RSV and COVID-19.

Class Cancellation Policy

Hand Tool SIG (27 Aug 2026)

Fri, 28 Aug 2026 01:00:00 GMT

Hand Tool Special Interest Group

The Guild of Oregon Woodworkers Hand Tool SIG meets the 4th Thursday of the Month (except November and December) from 6:00 pm until 9:00 pm in the Guild Studio.

Topic: In the August meeting we will start with show and tell then proceed to finish up the sliding lid boxes we started last time. Even if you didn’t start a box last time, come anyway so you can see the process and have a chance to use the tools.

Woodwright Inspirational Episode: https://www.pbs.org/video/woodwrights-shop-sliding-lid-boxes/

If you are not on the Hand Tool SIG email list please contact handtool.lead@guildoforegonwoodworkers.org to be added to the Hand Tool SIG email list.

All Guild members are welcome at no charge. Please Register.

EDS - CORE TOOL CERTIFICATION - EVENING 26-39 (28 Aug 2026)

Sat, 29 Aug 2026 00:00:00 GMT

Instructor - Mike Sandmann

Assistant - Ezra Richards, Matt Grommes

Prerequisites: Completion of Intro to the Guild (all members) and Getting Started (beginners only)

This class is designed for the member to become certified on the "Core tools" and is required to work in the Guild machine room or to take classes using the “core” power tools.

Materials will be provided.

Please contact Kimberly Grommes with questions.

Check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

Class Cancellation Policy

EDG - BUILDING CUSTOM CABINETS FOR YOUR HOME 26-3 (29 Aug 2026)

Sat, 29 Aug 2026 16:00:00 GMT

BUILDING CUSTOM CABINETS FOR YOUR HOME

Instructor - Bill Gemulla

Class Assistants - Allie Menard & Gerry Murphy

Prerequisites:

Core Tool Certification

Sufficient experience to confidently work with powered hand tools and machine tools

Skill Level: Intermediate/Advanced. Intermediate woodworkers have some woodworking experience on most machines

Description: This two day class is an introduction to residential cabinetmaking. We’ll review the basics of layout, design, materials, hardware options, construction, installation and the tool kit. Our emphasis will be demonstrations and the hands-on building of a simple cabinet. Each student will build and take home a paint-grade utility cabinet that includes a door, a drawer and an adjustable shelf. The cabinet will be approximately 24" wide, 36" tall and 24" deep.

Class Goal: Learn the basics of residential cabinet making.

Tools Used: Table saw, nail guns, staple guns, plate joiner (biscuit cutter), drill and driver, planer (optional), router (optional; certification not required).

Materials:

Guild provided: Guild will provide lumber, plywood, hardware (drawer slides, hinges, screws) and project supplies.

Student Provided: PPE

Recommended Tools: You'll get more out of the class if you bring your own tools, and our class will progress more smoothly. The Guild will supply tools that you don't bring though our inventory is limited. Instructor will provide a detailed list of tools you should bring if you have them.

Check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

The Guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending Guild events, workshops, or gatherings when experiencing symptoms of a contagious illness, especially those associated with the flu, RSV or COVID-19..

Class Cancellation Policy

EDS - CORE TOOL CERTIFICATION - AFTERNOON 26-40 (29 Aug 2026)

Sat, 29 Aug 2026 20:00:00 GMT

Instructor - Stuart Brown

Assistant - Tom Nelson

Prerequisites: Completion of Intro to the Guild (all members) and Getting Started (beginners only)

This class is designed for the member to become certified on the "Core tools" and is required to work in the Guild machine room or to take classes using the “core” power tools.

Materials will be provided.

Please contact Kimberly Grommes with questions.

Check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

Class Cancellation Policy

EDG - BUILDING CUSTOM CABINETS FOR YOUR HOME 26-3 (30 Aug 2026)

Sun, 30 Aug 2026 16:00:00 GMT

BUILDING CUSTOM CABINETS FOR YOUR HOME

Instructor - Bill Gemulla

Class Assistants - Allie Menard & Gerry Murphy

Prerequisites:

Core Tool Certification

Sufficient experience to confidently work with powered hand tools and machine tools

Skill Level: Intermediate/Advanced. Intermediate woodworkers have some woodworking experience on most machines

Class Goal: Learn the basics of residential cabinet making.

Tools Used: Table saw, nail guns, staple guns, plate joiner (biscuit cutter), drill and driver, planer (optional), router (optional; certification not required).

Materials:

Guild provided: Guild will provide lumber, plywood, hardware (drawer slides, hinges, screws) and project supplies.

Student Provided: PPE

Recommended Tools: You'll get more out of the class if you bring your own tools, and our class will progress more smoothly. The Guild will supply tools that you don't bring though our inventory is limited. Instructor will provide a detailed list of tools you should bring if you have them.

Check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

The Guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending Guild events, workshops, or gatherings when experiencing symptoms of a contagious illness, especially those associated with the flu, RSV or COVID-19..

Class Cancellation Policy

EDS Getting Started-Hands On With Portable Power Tools 26-24 (01 Sep 2026)

Tue, 01 Sep 2026 16:00:00 GMT

Getting Started – Shop Safety for Beginners

Instructors: TBD

Class Assistant: TBD

Prerequisite: Introduction to Guild Safety

The Getting Started class is a continuation of the safety process in good woodworking practices taught in the Intro to the Guild class.

Getting Started is a required class for those needing experience with the safe and appropriate use of portable power tools, prior to starting the path to the Guild’s Shop Certification classes.

This is a four-hour class, with ~2½ hours of practice with a jig saw, a trim router, a random orbital sander, drill motors (battery), and installing their accessories.

Curriculum includes:

Drawing up a plan and cutting list
Wood characteristics, hidden hazards
Simple approaches to accuracy,
Specific tool safety techniques.

The final section of the class will be using these tools to create a cutting board. Material provided by the Guild.

Please review the Guild’s PPE (personal protection equipment) policy from the Intro to the Guild class.

Have all your PPE for this class. Approved wrap around safety glasses, hearing protection, a dust mask (these tools are not connected to the dust collection system).

Class size is 6 students. Each student will have their own area in the Shop with each tool to be demonstrated. No tool sharing. Safe distancing.

Dress appropriately for working in the Shop. (hair tied back, no dangling sleeves, bracelets, strings etc)

The handouts will be reviewed in class.

These items will be used during class pencil, combination square or similar, razor knife, tape measure, notebook, piece of chalk, blank piece of paper for drawing and a straight edge.

Please bring your own PPE and pencil.

Upon completion of Getting Started, members can sign-up for the Core Tool Certification classes.

For more information on the Shop Certification process:https://guildoforegonwoodworkers.org/Safety-Classes-&-Shop-Certification

The Guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending Guild events when experiencing symptoms of a contagious illness, especially those associated with flu, RSV or COVID-19.

Class Cancellation Policy

EDS - CORE TOOL CERTIFICATION - AFTERNOON 26-41 (01 Sep 2026)

Tue, 01 Sep 2026 20:00:00 GMT

Instructor - Dennis Dolph

Assistant - Dave Dixon, Mark Klein

Prerequisites: Completion of Intro to the Guild (all members) and Getting Started (beginners only)

This class is designed for the member to become certified on the "Core tools" and is required to work in the Guild machine room or to take classes using the “core” power tools.

Materials will be provided.

Please contact Kimberly Grommes with questions.

Check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

Class Cancellation Policy

Women in the Shop (01 Sep 2026)

Wed, 02 Sep 2026 00:00:00 GMT

women's IN THE SHOP

Shop Attendant: Ruth Warbington

Prerequisites: Introduction to Guild Safety

Core Tool Certification required if working in the machine room

Women of the Guild! Come join other women for fellowship, conversation, some learning, and making some sawdust if you like.

5:00 -7:00 Open Shop time: this is for using either the bench room or the machine room. Limited number of spaces available. Register for Open Shop. This will include the program time later in the evening.

6:30-7:00 Social time and show and tell in the Bench Room. If just attending this part and/or the Program, please register for Program

7:00-9:00 Program to be determined. If just attending this, please register for Program.

EDS - INTRO TO GUILD SAFETY 2026-17 (01 Sep 2026)

Wed, 02 Sep 2026 01:00:00 GMT

Introduction to Guild Safety

Instructor: Education and Membership Team

Included in the class is a tour of the Guild Shop, introducing the stationary tools and their function.

This class is about 3 hours.

Please include your name in the list of attendees so the Instructor can track attendance and make your Guild shop name badge. It is only visible on the class registration list to other Guild members.

Complete the following before class:

Print out and complete the self-evaluation section (left side) of the New Member Experience Assessment/Shop Certification form. Bring the entire form to class.
Be sure you have read and then checked the box on your member profile acknowledging that you have read and agreed to the Liability Release form.
Read the attached resources and take the Guild Safety Test. Bring your answers to class on paper or a device.

General Safety

Guild Safety Manual

Policy on the Use of Personal Protective Equipment

Material Guidelines

Upon completion of the Intro to the Guild Safety class, you will be directed to:

1. A second beginning class, Getting Started; required for those with little or no experience with portable power tools.

2. Bypass the Getting Started class and start the path to the Shop Certification classes.

For more information on the Shop Certification process: https://guildoforegonwoodworkers.org/Safety-Classes-&-Shop-Certification

Check out the Guild Scholarship Program to see if you qualify for the various scholarships we offer.

The Guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending Guild events when experiencing symptoms of a contagious illness, especially those associated with RSV, flu or COVID-19.

Class Cancellation Policy

EDS - ROUTER AND ROUTER TABLE BASICS AND CERTIFICATION 26-17 (03 Sep 2026)

Thu, 03 Sep 2026 16:00:00 GMT

ROUTER AND ROUTER TABLE BASICS AND CERTIFICATION

Instructors - Jim Meyer

Class Assistant - TBD

Prerequisites: Core Tool Certification

This class is about safe use of router and router table and is designed to provide you with Certification on these machines.

The router is one of the most versatile tools in the shop. It is commonly used to do routine cutting of slots with a straight bit, but has great flexibility in edge profiling and in use with jigs. The router is a simple motor 1, 2¼ or 3½ horsepower with a changeable collet that can hold thousands of bit styles. It can be mounted in a table for exquisite control or hand held when the project is too large to get onto the table.

If you are not confident in your mastery of this machine, then this is the class for you. We will discuss best practice for each operation, you will see it demonstrated, and then you will have the opportunity to perform the procedure yourself, hands on. By the end of the class, you should feel comfortable that you can operate these machines safely. Materials will be provided.

Bring your PPE.

Check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

The guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending guild events, workshops, or gatherings when experiencing symptoms of a contagious illness, especially those associated with COVID-19.
Follow CDC guidelines: If you have tested positive for COVID-19 or have been exposed to someone who has tested positive for COVID-19, you are expected to follow the current CDC guidelines.

Class Cancellation Policy

EDS - CORE TOOL CERTIFICATION - EVENING 26-42 (03 Sep 2026)

Fri, 04 Sep 2026 00:00:00 GMT

Instructor - Mark Klein

Assistant - JJ Hoffman, Micah Stolowitz

Prerequisites: Completion of Intro to the Guild (all members) and Getting Started (beginners only)

This class is designed for the member to become certified on the "Core tools" and is required to work in the Guild machine room or to take classes using the “core” power tools.

Materials will be provided.

Please contact Kimberly Grommes with questions.

Check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

Class Cancellation Policy

Box SIG (03 Sep 2026)

Fri, 04 Sep 2026 00:30:00 GMT

BOX SIG

Bring your boxes for show and tell! Bring your questions for help on solving problems. After the program, those who wish to continue the conversation will walk up the street for some food & drink.

Guild classes are Member-only classes. Not a member? Visit the Membership webpage and Join Now.

EDS - CORE TOOL CERTIFICATION - EVENING 26-39 (04 Sep 2026)

Sat, 05 Sep 2026 00:00:00 GMT

Instructor - Mike Sandmann

Assistant - Ezra Richards, Matt Grommes

Prerequisites: Completion of Intro to the Guild (all members) and Getting Started (beginners only)

This class is designed for the member to become certified on the "Core tools" and is required to work in the Guild machine room or to take classes using the “core” power tools.

Materials will be provided.

Please contact Kimberly Grommes with questions.

Check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

Class Cancellation Policy

EDS - CORE TOOL CERTIFICATION - AFTERNOON 26-40 (05 Sep 2026)

Sat, 05 Sep 2026 20:00:00 GMT

Instructor - Stuart Brown

Assistant - Tom Nelson

Prerequisites: Completion of Intro to the Guild (all members) and Getting Started (beginners only)

This class is designed for the member to become certified on the "Core tools" and is required to work in the Guild machine room or to take classes using the “core” power tools.

Materials will be provided.

Please contact Kimberly Grommes with questions.

Check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

Class Cancellation Policy

EDS - ROUTER AND ROUTER TABLE BASICS AND CERTIFICATION 26-18 (06 Sep 2026)

Sun, 06 Sep 2026 16:00:00 GMT

ROUTER AND ROUTER TABLE BASICS AND CERTIFICATION

Instructor - Scott Demming

Class Assistant - TBD

Prerequisites: Core Tool Certification

This class is about safe use of router and router table and is designed to provide you with Certification on these machines.

Bring your PPE.

Check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

The guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending guild events, workshops, or gatherings when experiencing symptoms of a contagious illness, especially those associated with COVID-19.
Follow CDC guidelines: If you have tested positive for COVID-19 or have been exposed to someone who has tested positive for COVID-19, you are expected to follow the current CDC guidelines.

Class Cancellation Policy

EDG - Open Studio - Hand Tool Mentoring 26-12 (06 Sep 2026)

Sun, 06 Sep 2026 20:00:00 GMT

Hand Tool Mentoring

Mentor: Tim Moore and others

Requirements: Intro to Guild Safety

Shop time

The time will be charged like machine use in open shop - $15 per hour with a 1 hour minimum. After 1 hour, the time is charged in 30 minute increments. Please purchase shop time before coming.

Tim suggests that you contact him with questions and anticipated arrival time so that he can plan the afternoon. tim.moore@guildoforegonwoodworkers.org

The Guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending guild events, workshops, or gatherings when experiencing symptoms of a contagious illness, especially those associated with RSV, Flu or COVID-19.

EDS - CORE TOOL CERTIFICATION - AFTERNOON 26-41 (08 Sep 2026)

Tue, 08 Sep 2026 20:00:00 GMT

Instructor - Dennis Dolph

Assistant - Dave Dixon, Mark Klein

Prerequisites: Completion of Intro to the Guild (all members) and Getting Started (beginners only)

This class is designed for the member to become certified on the "Core tools" and is required to work in the Guild machine room or to take classes using the “core” power tools.

Materials will be provided.

Please contact Kimberly Grommes with questions.

Check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

Class Cancellation Policy

Chair Making SIG (08 Sep 2026)

Wed, 09 Sep 2026 01:30:00 GMT

CHAIR MAKING SIG

Leader: Bruce Schafer

Register for this Free event

Are you interested in making chairs?

Chairmaking is a fascinating branch of woodworking with many special considerations. In addition to aesthetics, a good chair needs to be comfortable and strong enough to withstand the forces and loads to which it will be subjected. Chairmaking topics range from use of templates, angled joinery, curved parts, steam bending and many others.

This forum is dedicated to the building of chairs where we can share ideas, learn new techniques, and help each other with projects and challenges. Whether you are just getting started, already building chairs, or just interested in building chairs, we want this group to support your needs and interests.

If you have questions, please contact Bruce Schafer at blschafer1@gmail.com

Please stay home if you are sick to protect our community from illness. Thank you.

EDG - Bandsaw Clinic - Precision Cutting with a Bandsaw 26-3 (09 Sep 2026)

Wed, 09 Sep 2026 20:00:00 GMT

Instructor: Chip Webster

Class Assistant: TBD

Prerequisites: Core Tool Certification

To get the most out of your 14" bandsaw (or any woodworking bandsaw), you need to become proficient at cutting to the line free-hand and learn when and how to use simple jigs effectively.

These bandsaws are capable of very accurate work, from cutting precise mortise and tenons and resawing the densest wood straight and smooth, to cutting fluid curved shapes.

This hands-on workshop with Chip Webster is based on Michael Fortune's material and experience, and is focused on learning and practicing these skills.

Check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

The gGuild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending Guild events, workshops, or gatherings when experiencing symptoms of a contagious illness, especially those associated with RSV, flu or COVID-19.

Class Cancellation Policy

EDS - CORE TOOL CERTIFICATION - EVENING 26-42 (10 Sep 2026)

Fri, 11 Sep 2026 00:00:00 GMT

Instructor - Mark Klein

Assistant - JJ Hoffman, Micah Stolowitz

Prerequisites: Completion of Intro to the Guild (all members) and Getting Started (beginners only)

This class is designed for the member to become certified on the "Core tools" and is required to work in the Guild machine room or to take classes using the “core” power tools.

Materials will be provided.

Please contact Kimberly Grommes with questions.

Check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

Class Cancellation Policy

CNC SIG (10 Sep 2026)

Fri, 11 Sep 2026 02:00:00 GMT

CNC SIG

If you are interested in learning more about CNC in woodworking join us. Beginner or advanced. CNC is a rapidly developing method of woodworking that is providing new opportunities for woodworkers. The SIG is a great way to develop relationships with other CNC users, share your creative ideas and propose ways to enhance the expertise of Guild's CNC community.

NOTE: The SIG has a "lead." But it is largely a self organized group. This means everyone gets to contribute toward setting topics for discussion, participation and keeping the group active. If you want a discussion on a topic, send your ideas ahead of time to the SIG lead.

Register and join us. For 2026, we meet on the 2nd Thursdays of Jan, Mar, May, Jul, Sep and Nov from 7 - 9 PM at the Guild Studio.

Staying Home When Sick:

Members are urged to prioritize their health and the health of others by refraining from attending Guild events, workshops, or gatherings when experiencing symptoms of a contagious illness, especially those associated with Flu, RSV or COVID-19.

EDG - Hand Plane Skills 26-3 (11 Sep 2026)

Sat, 12 Sep 2026 00:00:00 GMT

Hand Plane Skills

Instructors: Ruth Warbington

Class Assistant: TBD

Students: 5 (if you're directed to the waitlist, class is full)

Prerequisites: Intro to Guild Safety

A hand plane is a powerful tool for woodworking; it complements power tools and other hand tools beautifully. Learn and practice the most common applications of the most-used hand planes: the jack (#5), smoother (#4), and block plane. If you only use power tools, you'll be exposed to the ways hand tools assist and augment machine work. We’ll flatten, joint, smooth, shoot, bevel, and chamfer quietly and effectively with hand planes. You’ll take apart, reassemble and adjust the planes so that they perform well for each task, learning first-hand the importance of sharpness and tool adjustment. We’ll also use workshop standbys such as hand saws, squares, straight edges, winding sticks, and shooting boards, as these are the companions of handplanes. If you are new to hand tools this class will be a good start; if you have a little experience you'll gain more.

We’ll have the planes and accessories which are needed. Bring your own planes if you have them and any of the other items mentioned in the description, but don’t go shopping until after class.

Please try to bring these basic tools, if you already have them: Pencil; 12” combination square; try square or small combo square.

Check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

The Guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending Guild events, workshops, or gatherings when experiencing symptoms of a contagious illness, especially those associated with flu, RSV or COVID-19.

Class Cancellation Policy

EDS Getting Started-Hands On With Portable Power Tools 26-25 (13 Sep 2026)

Sun, 13 Sep 2026 16:00:00 GMT

Getting Started – Shop Safety for Beginners

Instructors: TBD

Class Assistant: TBD

Prerequisite: Introduction to Guild Safety

The Getting Started class is a continuation of the safety process in good woodworking practices taught in the Intro to the Guild class.

Getting Started is a required class for those needing experience with the safe and appropriate use of portable power tools, prior to starting the path to the Guild’s Shop Certification classes.

This is a four-hour class, with ~2½ hours of practice with a jig saw, a trim router, a random orbital sander, drill motors (battery), and installing their accessories.

Curriculum includes:

Drawing up a plan and cutting list
Wood characteristics, hidden hazards
Simple approaches to accuracy,
Specific tool safety techniques.

The final section of the class will be using these tools to create a cutting board. Material provided by the Guild.

Please review the Guild’s PPE (personal protection equipment) policy from the Intro to the Guild class.

Have all your PPE for this class. Approved wrap around safety glasses, hearing protection, a dust mask (these tools are not connected to the dust collection system).

Class size is 6 students. Each student will have their own area in the Shop with each tool to be demonstrated. No tool sharing. Safe distancing.

Dress appropriately for working in the Shop. (hair tied back, no dangling sleeves, bracelets, strings etc)

The handouts will be reviewed in class.

These items will be used during class pencil, combination square or similar, razor knife, tape measure, notebook, piece of chalk, blank piece of paper for drawing and a straight edge.

Please bring your own PPE and pencil.

Upon completion of Getting Started, members can sign-up for the Core Tool Certification classes.

For more information on the Shop Certification process:https://guildoforegonwoodworkers.org/Safety-Classes-&-Shop-Certification

The Guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending Guild events when experiencing symptoms of a contagious illness, especially those associated with flu, RSV or COVID-19.

Class Cancellation Policy

Marquetry SIG (14 Sep 2026)

Mon, 14 Sep 2026 20:00:00 GMT

MARQUETRY SIG

The Marquetry SIG is a time to share what you're doing with marquetry. Bring your pieces for show and tell. These can be either complete or in progress. We'll also discuss the challenges we're having. There may be opportunities to share materials so be thinking about what you have and what you'd like to have.

The SIG will be meeting quarterly. For more information, contact Carol Boyd.

Guild classes are Member-only classes. Not a member? Visit the Membership webpage and Join Now.

EDS - CORE TOOL CERTIFICATION - EVENING 26-43 (14 Sep 2026)

Tue, 15 Sep 2026 00:00:00 GMT

Instructor - Jim Meyer

Assistant - David Neff

Prerequisites: Completion of Intro to the Guild (all members) and Getting Started (beginners only)

This class is designed for the member to become certified on the "Core tools" and is required to work in the Guild machine room or to take classes using the “core” power tools.

Materials will be provided.

Please contact Kimberly Grommes with questions.

Check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

Class Cancellation Policy

EDS - PANTOROUTER CERTIFICATION CLASS 26-09 (15 Sep 2026)

Tue, 15 Sep 2026 20:00:00 GMT

PantoRouter Certification Class

Instructor: Pat Shuff
Class Assistant: TBD

Prerequisites: Core Tool Certification and Router Certification

Cost: $90

The PantoRouter™ is an innovative tools that utlizes a router to create highly precise joinery, including mortise and tenon joints, dovetail joints, box joints, and other specialized joint types.

Students should bring personal protective equipment, including safety goggles and hearing protection.

Guild classes are Member-only classes. Not a member? Visit the Membership webpage and Join Now.

Check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

The guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending guild events, workshops, or gatherings when experiencing symptoms of a contagious illness, especially those associated with COVID-19.
Follow CDC guidelines: If you have tested positive for COVID-19 or have been exposed to someone who has tested positive for COVID-19, you are expected to follow the current CDC guidelines.

Class Cancellation Policy

EDS - CORE TOOL CERTIFICATION - AFTERNOON 26-41 (15 Sep 2026)

Tue, 15 Sep 2026 20:00:00 GMT

Instructor - Dennis Dolph

Assistant - Dave Dixon, Mark Klein

Prerequisites: Completion of Intro to the Guild (all members) and Getting Started (beginners only)

This class is designed for the member to become certified on the "Core tools" and is required to work in the Guild machine room or to take classes using the “core” power tools.

Materials will be provided.

Please contact Kimberly Grommes with questions.

Check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

Class Cancellation Policy

EDS - CORE TOOL CERTIFICATION - EVENING 26-42 (17 Sep 2026)

Fri, 18 Sep 2026 00:00:00 GMT

Instructor - Mark Klein

Assistant - JJ Hoffman, Micah Stolowitz

Prerequisites: Completion of Intro to the Guild (all members) and Getting Started (beginners only)

This class is designed for the member to become certified on the "Core tools" and is required to work in the Guild machine room or to take classes using the “core” power tools.

Materials will be provided.

Please contact Kimberly Grommes with questions.

Check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

Class Cancellation Policy

EDG - Sharpening Chisels and Plane Irons 26-6 (17 Sep 2026)

Fri, 18 Sep 2026 00:00:00 GMT

Instructor: Mark Allen

Class Assistant: TBD

Students: 4

Prerequisite: Intro to Guild Safety

Check out the Guild Scholarship Program to see if you qualify for the various scholarships we offer.

The Guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending Guild events, workshops, or gatherings when experiencing symptoms of a contagious illness, especially those associated with RSV, flu or COVID-19.

Class Cancellation Policy

EDG-Fundamentals of Veneering 26-2 (18 Sep 2026)

Fri, 18 Sep 2026 16:00:00 GMT

Fundamentals of Veneering

Instructor - Chip Webster

Chip Webster has been restoring fine old furniture for over 20 years, often requiring

repairing or making new veneer panels for doors, cabinet tops and other components.

Class Assistant - Bob Mack

Prerequisites:

Core Tool Certification

Skill Level: Beginner, Intermediate

Class Goals: to learn the fundamentals of veneering using a variety of clamping systems and process techniques.

Veneers are often used to apply expensive exotic woods or woods with figure or a beautiful grain pattern to a less expensive board. They are also used to create decorative elements, such as inlaid pictures or banding, in projects.

In this workshop we will make a small panel to take home suitable for use as a lid for a small box. We will explore the use of commercially available veneers and shop sawn veneers, where to use each and how to apply them. Different substrates and adhesives will be discussed and used during the class. Cutting and jointing veneer, and the process of securing and clamping, including a vacuum press, will be practiced. We will also make various edge treatments and discuss the requirements and process to produce a curved panel.

Veneer, tape and other materials will be provided. Students will be required to bring a #11 XActo knife or Olfa utility knife.

Students should also bring, if they have available, a sharp low angled block plane and several 12" F style clamps (Harbor Freight is a great source for the F clamps at a very reasonable cost).

We will be working with a bandsaw, jointer, planer, drum sander, and table saw in this workshop.

Students should plan to bring lunch or visit a local establishment.

Check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

The Guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending Guild events, workshops, or gatherings when experiencing symptoms of a contagious illness, especially those associated with RSV, flu and COVID-19.

Class Cancellation Policy

EDS - CORE TOOL CERTIFICATION - EVENING 26-44 (18 Sep 2026)

Sat, 19 Sep 2026 00:00:00 GMT

Instructor - Micah Stolowitz

Assistant - Mike Sandmann

Prerequisites: Completion of Intro to the Guild (all members) and Getting Started (beginners only)

This class is designed for the member to become certified on the "Core tools" and is required to work in the Guild machine room or to take classes using the “core” power tools.

Materials will be provided.

Please contact Kimberly Grommes with questions.

Check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

Class Cancellation Policy

EDS - CORE TOOL CERTIFICATION - AFTERNOON 26-45 (19 Sep 2026)

Sat, 19 Sep 2026 20:00:00 GMT

Instructor - JJ Hoffman, Jim Meyer

Assistant - Micah Stolowitz, Tim Moore

Prerequisites: Completion of Intro to the Guild (all members) and Getting Started (beginners only)

This class is designed for the member to become certified on the "Core tools" and is required to work in the Guild machine room or to take classes using the “core” power tools.

Materials will be provided.

Please contact Kimberly Grommes with questions.

Check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

Class Cancellation Policy

EDS - INTRO TO GUILD SAFETY 2026-18 (20 Sep 2026)

Sun, 20 Sep 2026 16:00:00 GMT

Introduction to Guild Safety

Instructor: Education and Membership Team

Included in the class is a tour of the Guild Shop, introducing the stationary tools and their function.

This class is about 3 hours.

Please include your name in the list of attendees so the Instructor can track attendance and make your Guild shop name badge. It is only visible on the class registration list to other Guild members.

Complete the following before class:

Print out and complete the self-evaluation section (left side) of the New Member Experience Assessment/Shop Certification form. Bring the entire form to class.
Be sure you have read and then checked the box on your member profile acknowledging that you have read and agreed to the Liability Release form.
Read the attached resources and take the Guild Safety Test. Bring your answers to class on paper or a device.

General Safety

Guild Safety Manual

Policy on the Use of Personal Protective Equipment

Material Guidelines

Upon completion of the Intro to the Guild Safety class, you will be directed to:

1. A second beginning class, Getting Started; required for those with little or no experience with portable power tools.

2. Bypass the Getting Started class and start the path to the Shop Certification classes.

For more information on the Shop Certification process: https://guildoforegonwoodworkers.org/Safety-Classes-&-Shop-Certification

Check out the Guild Scholarship Program to see if you qualify for the various scholarships we offer.

The Guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending Guild events when experiencing symptoms of a contagious illness, especially those associated with RSV, flu or COVID-19.

Class Cancellation Policy

EDS - CORE TOOL CERTIFICATION - EVENING 26-43 (21 Sep 2026)

Tue, 22 Sep 2026 00:00:00 GMT

Instructor - Jim Meyer

Assistant - David Neff

Prerequisites: Completion of Intro to the Guild (all members) and Getting Started (beginners only)

This class is designed for the member to become certified on the "Core tools" and is required to work in the Guild machine room or to take classes using the “core” power tools.

Materials will be provided.

Please contact Kimberly Grommes with questions.

Check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

Class Cancellation Policy

Lutherie SIG (22 Sep 2026)

Wed, 23 Sep 2026 00:30:00 GMT

LUTHERIE SIG

SIG Leads: Janet Starck & Tim Moore

Requirements: Intro to Guild Safety

This SIG is for anyone interested in Lutherie no matter your skill or knowledge level. Come and learn or share your knowledge and love of stringed instruments with other Guild members.

For additional information or to be added to the Lutherie email list contact Tim Moore.

All Guild Members are welcome at no charge. Please Register.

------------------------------------------------------------------------------------------------------------------------

Not a member? Visit the Membership webpage and Join Now.

Hand Tool SIG (24 Sep 2026)

Fri, 25 Sep 2026 01:00:00 GMT

Hand Tool Special Interest Group

The Guild of Oregon Woodworkers Hand Tool SIG meets the 4th Thursday of the Month (except November and December) from 6:00 pm until 9:00 pm in the Guild Studio.

Topic: TBD

If you are not on the Hand Tool SIG email list please contact handtool.lead@guildoforegonwoodworkers.org to be added to the Hand Tool SIG email list.

All Guild members are welcome at no charge. Please Register.

EDS - CORE TOOL CERTIFICATION - EVENING 26-44 (25 Sep 2026)

Sat, 26 Sep 2026 00:00:00 GMT

Instructor - Micah Stolowitz

Assistant - Mike Sandmann

Prerequisites: Completion of Intro to the Guild (all members) and Getting Started (beginners only)

This class is designed for the member to become certified on the "Core tools" and is required to work in the Guild machine room or to take classes using the “core” power tools.

Materials will be provided.

Please contact Kimberly Grommes with questions.

Check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

Class Cancellation Policy

EDS - CORE TOOL CERTIFICATION - AFTERNOON 26-45 (26 Sep 2026)

Sat, 26 Sep 2026 20:00:00 GMT

Instructor - JJ Hoffman, Jim Meyer

Assistant - Micah Stolowitz, Tim Moore

Prerequisites: Completion of Intro to the Guild (all members) and Getting Started (beginners only)

This class is designed for the member to become certified on the "Core tools" and is required to work in the Guild machine room or to take classes using the “core” power tools.

Materials will be provided.

Please contact Kimberly Grommes with questions.

Check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

Class Cancellation Policy

EDS - CORE TOOL CERTIFICATION - EVENING 26-43 (28 Sep 2026)

Tue, 29 Sep 2026 00:00:00 GMT

Instructor - Jim Meyer

Assistant - David Neff

Prerequisites: Completion of Intro to the Guild (all members) and Getting Started (beginners only)

This class is designed for the member to become certified on the "Core tools" and is required to work in the Guild machine room or to take classes using the “core” power tools.

Materials will be provided.

Please contact Kimberly Grommes with questions.

Check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

Class Cancellation Policy

Box SIG (01 Oct 2026)

Fri, 02 Oct 2026 00:30:00 GMT

BOX SIG

Bring your boxes for show and tell! Bring your questions for help on solving problems. After the program, those who wish to continue the conversation will walk up the street for some food & drink.

Guild classes are Member-only classes. Not a member? Visit the Membership webpage and Join Now.

EDS - CORE TOOL CERTIFICATION - EVENING 26-44 (02 Oct 2026)

Sat, 03 Oct 2026 00:00:00 GMT

Instructor - Micah Stolowitz

Assistant - Mike Sandmann

Prerequisites: Completion of Intro to the Guild (all members) and Getting Started (beginners only)

This class is designed for the member to become certified on the "Core tools" and is required to work in the Guild machine room or to take classes using the “core” power tools.

Materials will be provided.

Please contact Kimberly Grommes with questions.

Check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

Class Cancellation Policy

EDS - CORE TOOL CERTIFICATION - AFTERNOON 26-45 (03 Oct 2026)

Sat, 03 Oct 2026 20:00:00 GMT

Instructor - JJ Hoffman, Jim Meyer

Assistant - Micah Stolowitz, Tim Moore

Prerequisites: Completion of Intro to the Guild (all members) and Getting Started (beginners only)

This class is designed for the member to become certified on the "Core tools" and is required to work in the Guild machine room or to take classes using the “core” power tools.

Materials will be provided.

Please contact Kimberly Grommes with questions.

Check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

Class Cancellation Policy

EDG - Open Studio - Hand Tool Mentoring 26-13 (04 Oct 2026)

Sun, 04 Oct 2026 20:00:00 GMT

Hand Tool Mentoring

Mentor: Tim Moore and others

Requirements: Intro to Guild Safety

Shop time

The time will be charged like machine use in open shop - $15 per hour with a 1 hour minimum. After 1 hour, the time is charged in 30 minute increments. Please purchase shop time before coming.

Tim suggests that you contact him with questions and anticipated arrival time so that he can plan the afternoon. tim.moore@guildoforegonwoodworkers.org

The Guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending guild events, workshops, or gatherings when experiencing symptoms of a contagious illness, especially those associated with RSV, Flu or COVID-19.

Women in the Shop (06 Oct 2026)

Wed, 07 Oct 2026 00:00:00 GMT

women's IN THE SHOP

Shop Attendant: Ruth Warbington

Prerequisites: Introduction to Guild Safety

Core Tool Certification required if working in the machine room

Women of the Guild! Come join other women for fellowship, conversation, some learning, and making some sawdust if you like.

6:30-7:00 Social time and show and tell in the Bench Room. If just attending this part and/or the Program, please register for Program

7:00-9:00 Program to be determined. If just attending this, please register for Program.

EDS - INTRO TO GUILD SAFETY 2026-19 (06 Oct 2026)

Wed, 07 Oct 2026 01:00:00 GMT

Introduction to Guild Safety

Instructor: Education and Membership Team

Included in the class is a tour of the Guild Shop, introducing the stationary tools and their function.

This class is about 3 hours.

Please include your name in the list of attendees so the Instructor can track attendance and make your Guild shop name badge. It is only visible on the class registration list to other Guild members.

Complete the following before class:

Print out and complete the self-evaluation section (left side) of the New Member Experience Assessment/Shop Certification form. Bring the entire form to class.
Be sure you have read and then checked the box on your member profile acknowledging that you have read and agreed to the Liability Release form.
Read the attached resources and take the Guild Safety Test. Bring your answers to class on paper or a device.

General Safety

Guild Safety Manual

Policy on the Use of Personal Protective Equipment

Material Guidelines

Upon completion of the Intro to the Guild Safety class, you will be directed to:

1. A second beginning class, Getting Started; required for those with little or no experience with portable power tools.

2. Bypass the Getting Started class and start the path to the Shop Certification classes.

For more information on the Shop Certification process: https://guildoforegonwoodworkers.org/Safety-Classes-&-Shop-Certification

Check out the Guild Scholarship Program to see if you qualify for the various scholarships we offer.

The Guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending Guild events when experiencing symptoms of a contagious illness, especially those associated with RSV, flu or COVID-19.

Class Cancellation Policy

EDG - CNC - Introduction to CNC Routing 26-5 (10 Oct 2026)

Sat, 10 Oct 2026 16:00:00 GMT

Introduction to CNC Routing

Prerequisite: Intro to Guild Safety

Interested in learning about CNC Routing and how you can incorporate this highly versatile tool into your woodworking? This class is for you! It starts at the very beginning, describing what CNC routing is all about and how it can be used in woodworking. You’ll then get experience using the software needed to design, create toolpaths, and cut your work on the Guild’s CNC machine.

This is a hands-on class; you’ll need to bring a laptop with the (free!) design software already installed. You’ll work at your own pace through scripted exercises that will teach you to create a design and toolpaths for a personalized sign. When complete, you’ll cut the sign and take it home!

To help support effective and efficient learning, this class includes one-on-one mentorship for each student. Imagine having a CNC expert at your side to guide you every step of the way through the self-paced exercises and machine operation. Enrollment in this all-day class also includes a follow up one-on-one mentorship session in the shop (or maybe the shop of your mentor) to reinforce your newly learned skills.

After completion of the course and approval of your mentor, you’ll have access to the Guild’s CNC machines when attended to by any CNC mentor. You will also have the skills to create simple CNC projects of your own or access literally thousands of designs available through Vectric or on third party Internet sites.

You may be wondering if you’ve got the “right stuff” for CNC. We can help you decide! Click this link for an introductory document and computer skill self-assessment to see if CNC is right for you.

Students need to bring a Windows desktop (or Macbook with virtualized Windows) and will pre-load the (free) Vectric VCarve design software. There is some additional homework required prior to the class. Detailed instructions provided at this link.

Note: This class includes an introductory Zoom call the Saturday 2 weeks prior to the class date from 9:00-11:00am. Attendance is required. If you do not attend the call, your registration will be cancelled.

Price: $230- Includes 10 hours of One on One Instruction (2 hours online + 8 hours in person), 4 hours of individual CNC mentoring (scheduled separately) and routing materials.
Lunch: You have the option to obtain lunch in the Village, but we highly recommend you bring your own lunch so we can "talk shop" while we break for a bite.

Check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

The guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick:

Class Cancellation Policy

Chair Making SIG (13 Oct 2026)

Wed, 14 Oct 2026 01:30:00 GMT

CHAIR MAKING SIG

Leader: Bruce Schafer

Register for this Free event

Are you interested in making chairs?

If you have questions, please contact Bruce Schafer at blschafer1@gmail.com

Please stay home if you are sick to protect our community from illness. Thank you.

EDS - INTRO TO GUILD SAFETY 2026-20 (18 Oct 2026)

Sun, 18 Oct 2026 16:00:00 GMT

Introduction to Guild Safety

Instructor: Education and Membership Team

Included in the class is a tour of the Guild Shop, introducing the stationary tools and their function.

This class is about 3 hours.

Please include your name in the list of attendees so the Instructor can track attendance and make your Guild shop name badge. It is only visible on the class registration list to other Guild members.

Complete the following before class:

Print out and complete the self-evaluation section (left side) of the New Member Experience Assessment/Shop Certification form. Bring the entire form to class.
Be sure you have read and then checked the box on your member profile acknowledging that you have read and agreed to the Liability Release form.
Read the attached resources and take the Guild Safety Test. Bring your answers to class on paper or a device.

General Safety

Guild Safety Manual

Policy on the Use of Personal Protective Equipment

Material Guidelines

Upon completion of the Intro to the Guild Safety class, you will be directed to:

1. A second beginning class, Getting Started; required for those with little or no experience with portable power tools.

2. Bypass the Getting Started class and start the path to the Shop Certification classes.

For more information on the Shop Certification process: https://guildoforegonwoodworkers.org/Safety-Classes-&-Shop-Certification

Check out the Guild Scholarship Program to see if you qualify for the various scholarships we offer.

The Guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending Guild events when experiencing symptoms of a contagious illness, especially those associated with RSV, flu or COVID-19.

Class Cancellation Policy

Hand Tool SIG (22 Oct 2026)

Fri, 23 Oct 2026 01:00:00 GMT

Hand Tool Special Interest Group

The Guild of Oregon Woodworkers Hand Tool SIG meets the 4th Thursday of the Month (except November and December) from 6:00 pm until 9:00 pm in the Guild Studio.

Topic: TBD

If you are not on the Hand Tool SIG email list please contact handtool.lead@guildoforegonwoodworkers.org to be added to the Hand Tool SIG email list.

All Guild members are welcome at no charge. Please Register.

Lutherie SIG (27 Oct 2026)

Wed, 28 Oct 2026 00:30:00 GMT

LUTHERIE SIG

SIG Leads: Janet Starck & Tim Moore

Requirements: Intro to Guild Safety

This SIG is for anyone interested in Lutherie no matter your skill or knowledge level. Come and learn or share your knowledge and love of stringed instruments with other Guild members.

For additional information or to be added to the Lutherie email list contact Tim Moore.

All Guild Members are welcome at no charge. Please Register.

------------------------------------------------------------------------------------------------------------------------

Not a member? Visit the Membership webpage and Join Now.

Women in the Shop (03 Nov 2026)

Wed, 04 Nov 2026 01:00:00 GMT

women's IN THE SHOP

Shop Attendant: Ruth Warbington

Prerequisites: Introduction to Guild Safety

Core Tool Certification required if working in the machine room

Women of the Guild! Come join other women for fellowship, conversation, some learning, and making some sawdust if you like.

6:30-7:00 Social time and show and tell in the Bench Room. If just attending this part and/or the Program, please register for Program

7:00-9:00 Program to be determined. If just attending this, please register for Program.

EDS - INTRO TO GUILD SAFETY 2026-21 (03 Nov 2026)

Wed, 04 Nov 2026 02:00:00 GMT

Introduction to Guild Safety

Instructor: Education and Membership Team

Included in the class is a tour of the Guild Shop, introducing the stationary tools and their function.

This class is about 3 hours.

Please include your name in the list of attendees so the Instructor can track attendance and make your Guild shop name badge. It is only visible on the class registration list to other Guild members.

Complete the following before class:

Print out and complete the self-evaluation section (left side) of the New Member Experience Assessment/Shop Certification form. Bring the entire form to class.
Be sure you have read and then checked the box on your member profile acknowledging that you have read and agreed to the Liability Release form.
Read the attached resources and take the Guild Safety Test. Bring your answers to class on paper or a device.

General Safety

Guild Safety Manual

Policy on the Use of Personal Protective Equipment

Material Guidelines

Upon completion of the Intro to the Guild Safety class, you will be directed to:

1. A second beginning class, Getting Started; required for those with little or no experience with portable power tools.

2. Bypass the Getting Started class and start the path to the Shop Certification classes.

For more information on the Shop Certification process: https://guildoforegonwoodworkers.org/Safety-Classes-&-Shop-Certification

Check out the Guild Scholarship Program to see if you qualify for the various scholarships we offer.

The Guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending Guild events when experiencing symptoms of a contagious illness, especially those associated with RSV, flu or COVID-19.

Class Cancellation Policy

Box SIG (05 Nov 2026)

Fri, 06 Nov 2026 01:30:00 GMT

BOX SIG

Bring your boxes for show and tell! Bring your questions for help on solving problems. After the program, those who wish to continue the conversation will walk up the street for some food & drink.

Guild classes are Member-only classes. Not a member? Visit the Membership webpage and Join Now.

EDG - Open Studio - Hand Tool Mentoring 26-14 (08 Nov 2026)

Sun, 08 Nov 2026 21:00:00 GMT

Hand Tool Mentoring

Mentor: Tim Moore and others

Requirements: Intro to Guild Safety

Shop time

The time will be charged like machine use in open shop - $15 per hour with a 1 hour minimum. After 1 hour, the time is charged in 30 minute increments. Please purchase shop time before coming.

Tim suggests that you contact him with questions and anticipated arrival time so that he can plan the afternoon. tim.moore@guildoforegonwoodworkers.org

The Guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending guild events, workshops, or gatherings when experiencing symptoms of a contagious illness, especially those associated with RSV, Flu or COVID-19.

Chair Making SIG (10 Nov 2026)

Wed, 11 Nov 2026 02:30:00 GMT

CHAIR MAKING SIG

Leader: Bruce Schafer

Register for this Free event

Are you interested in making chairs?

If you have questions, please contact Bruce Schafer at blschafer1@gmail.com

Please stay home if you are sick to protect our community from illness. Thank you.

CNC SIG (12 Nov 2026)

Fri, 13 Nov 2026 03:00:00 GMT

CNC SIG

Register and join us. For 2026, we meet on the 2nd Thursdays of Jan, Mar, May, July, Spetember and November from 7 - 9 PM at the Guild Studio.

Staying Home When Sick:

EDS - INTRO TO GUILD SAFETY 2026-22 (15 Nov 2026)

Sun, 15 Nov 2026 17:00:00 GMT

Introduction to Guild Safety

Instructor: Education and Membership Team

Included in the class is a tour of the Guild Shop, introducing the stationary tools and their function.

This class is about 3 hours.

Please include your name in the list of attendees so the Instructor can track attendance and make your Guild shop name badge. It is only visible on the class registration list to other Guild members.

Complete the following before class:

Print out and complete the self-evaluation section (left side) of the New Member Experience Assessment/Shop Certification form. Bring the entire form to class.
2.Be sure you have read and then checked the box on your member profile acknowledging that you have read and agreed to the Liability Release form.
Read the attached resources and take the Guild Safety Test. Bring your answers to class on paper or a device.

General Safety

Guild Safety Manual

Policy on the Use of Personal Protective Equipment

Material Guidelines

Upon completion of the Intro to the Guild Safety class, you will be directed to:

1. A second beginning class, Getting Started; required for those with little or no experience with portable power tools.

2. Bypass the Getting Started class and start the path to the Shop Certification classes.

For more information on the Shop Certification process: https://guildoforegonwoodworkers.org/Safety-Classes-&-Shop-Certification

Check out the Guild Scholarship Program to see if you qualify for the various scholarships we offer.

The Guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending Guild events when experiencing symptoms of a contagious illness, especially those associated with RSV, flu or COVID-19.

Class Cancellation Policy

Lutherie SIG (24 Nov 2026)

Wed, 25 Nov 2026 01:30:00 GMT

LUTHERIE SIG

SIG Leads: Janet Starck & Tim Moore

Requirements: Intro to Guild Safety

This SIG is for anyone interested in Lutherie no matter your skill or knowledge level. Come and learn or share your knowledge and love of stringed instruments with other Guild members.

For additional information or to be added to the Lutherie email list contact Tim Moore.

All Guild Members are welcome at no charge. Please Register.

------------------------------------------------------------------------------------------------------------------------

Not a member? Visit the Membership webpage and Join Now.

Women in the Shop (01 Dec 2026)

Wed, 02 Dec 2026 01:00:00 GMT

women's IN THE SHOP

Shop Attendant: Ruth Warbington

Prerequisites: Introduction to Guild Safety

Core Tool Certification required if working in the machine room

Women of the Guild! Come join other women for fellowship, conversation, some learning, and making some sawdust if you like.

6:30-7:00 Social time and show and tell in the Bench Room. If just attending this part and/or the Program, please register for Program

7:00-9:00 Program to be determined. If just attending this, please register for Program.

EDS - INTRO TO GUILD SAFETY 2026-23 (01 Dec 2026)

Wed, 02 Dec 2026 02:00:00 GMT

Introduction to Guild Safety

Instructor: Education and Membership Team

Included in the class is a tour of the Guild Shop, introducing the stationary tools and their function.

This class is about 3 hours.

Please include your name in the list of attendees so the Instructor can track attendance and make your Guild shop name badge. It is only visible on the class registration list to other Guild members.

Complete the following before class:

Print out and complete the self-evaluation section (left side) of the New Member Experience Assessment/Shop Certification form. Bring the entire form to class.
Be sure you have read and then checked the box on your member profile acknowledging that you have read and agreed to the Liability Release form.
Read the attached resources and take the Guild Safety Test. Bring your answers to class on paper or a device.

General Safety

Guild Safety Manual

Policy on the Use of Personal Protective Equipment

Material Guidelines

Upon completion of the Intro to the Guild Safety class, you will be directed to:

1. A second beginning class, Getting Started; required for those with little or no experience with portable power tools.

2. Bypass the Getting Started class and start the path to the Shop Certification classes.

For more information on the Shop Certification process: https://guildoforegonwoodworkers.org/Safety-Classes-&-Shop-Certification

Check out the Guild Scholarship Program to see if you qualify for the various scholarships we offer.

The Guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending Guild events when experiencing symptoms of a contagious illness, especially those associated with RSV, flu or COVID-19.

Class Cancellation Policy

Box SIG (03 Dec 2026)

Fri, 04 Dec 2026 01:30:00 GMT

BOX SIG

Bring your boxes for show and tell! Bring your questions for help on solving problems. After the program, those who wish to continue the conversation will walk up the street for some food & drink.

Guild classes are Member-only classes. Not a member? Visit the Membership webpage and Join Now.

Masters Event - Stay Tuned - information at a later date (05 Dec 2026)

Sat, 05 Dec 2026 17:00:00 GMT

EDG - Open Studio - Hand Tool Mentoring 26-15 (06 Dec 2026)

Sun, 06 Dec 2026 21:00:00 GMT

Hand Tool Mentoring

Mentor: Tim Moore and others

Requirements: Intro to Guild Safety

Shop time

The time will be charged like machine use in open shop - $15 per hour with a 1 hour minimum. After 1 hour, the time is charged in 30 minute increments. Please purchase shop time before coming.

Tim suggests that you contact him with questions and anticipated arrival time so that he can plan the afternoon. tim.moore@guildoforegonwoodworkers.org

The Guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending guild events, workshops, or gatherings when experiencing symptoms of a contagious illness, especially those associated with RSV, Flu or COVID-19.

Chair Making SIG (08 Dec 2026)

Wed, 09 Dec 2026 02:30:00 GMT

CHAIR MAKING SIG

Leader: Bruce Schafer

Register for this Free event

Are you interested in making chairs?

If you have questions, please contact Bruce Schafer at blschafer1@gmail.com

Please stay home if you are sick to protect our community from illness. Thank you.

EDG - CNC - Introduction to CNC Routing 26-6 (12 Dec 2026)

Sat, 12 Dec 2026 17:00:00 GMT

Introduction to CNC Routing

Prerequisite: Intro to Guild Safety

Check out the Guild Scholarship Program to see if you qualify for the various scholarship we offer.

The guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick:

Class Cancellation Policy

Marquetry SIG (14 Dec 2026)

Mon, 14 Dec 2026 21:00:00 GMT

MARQUETRY SIG

The SIG will be meeting quarterly. For more information, contact Carol Boyd.

Guild classes are Member-only classes. Not a member? Visit the Membership webpage and Join Now.

EDS - INTRO TO GUILD SAFETY 2026-24 (20 Dec 2026)

Sun, 20 Dec 2026 17:00:00 GMT

Introduction to Guild Safety

Instructor: Education and Membership Team

Included in the class is a tour of the Guild Shop, introducing the stationary tools and their function.

This class is about 3 hours.

Please include your name in the list of attendees so the Instructor can track attendance and make your Guild shop name badge. It is only visible on the class registration list to other Guild members.

Complete the following before class:

Print out and complete the self-evaluation section (left side) of the New Member Experience Assessment/Shop Certification form. Bring the entire form to class.
Be sure you have read and then checked the box on your member profile acknowledging that you have read and agreed to the Liability Release form.
Read the attached resources and take the Guild Safety Test. Bring your answers to class on paper or a device.

General Safety

Guild Safety Manual

Policy on the Use of Personal Protective Equipment

Material Guidelines

Upon completion of the Intro to the Guild Safety class, you will be directed to:

1. A second beginning class, Getting Started; required for those with little or no experience with portable power tools.

2. Bypass the Getting Started class and start the path to the Shop Certification classes.

For more information on the Shop Certification process: https://guildoforegonwoodworkers.org/Safety-Classes-&-Shop-Certification

Check out the Guild Scholarship Program to see if you qualify for the various scholarships we offer.

The Guild promotes and encourages all members to act responsibly in matters of health and safety by adhering to the following measures:

Staying Home When Sick: Members are urged to prioritize their health and the health of others by refraining from attending Guild events when experiencing symptoms of a contagious illness, especially those associated with RSV, flu or COVID-19.

Class Cancellation Policy

Lutherie SIG (22 Dec 2026)

Wed, 23 Dec 2026 01:30:00 GMT

LUTHERIE SIG

SIG Leads: Janet Starck & Tim Moore

Requirements: Intro to Guild Safety

This SIG is for anyone interested in Lutherie no matter your skill or knowledge level. Come and learn or share your knowledge and love of stringed instruments with other Guild members.

For additional information or to be added to the Lutherie email list contact Tim Moore.

All Guild Members are welcome at no charge. Please Register.

------------------------------------------------------------------------------------------------------------------------

Not a member? Visit the Membership webpage and Join Now.